Bookmark and Share
Electrolux 241540301en-009

Electrolux 241540301en-009

From YouserGuide

Jump to: navigation, search
You can edit and write guides yourself, or if you prefer, just send your input to guides@youserguide.com

241540301_Frigidaire_sxs_cd_Use&Care_En.PMD (Product)
Pg. 1-2-3-4-5-6-7-8- 9 -10-11-20-26

Products referring to this guide:-Frigidaire GHSC239D-Frigidaire GHSC39ETE-Frigidaire GHSC39EE-Frigidaire GHSC39EE 1-Frigidaire GHSC2397TD:more

Enter your
Part number


background image
9
Temperature Controls
OTHER CONTROL FEATURES
TURNING THE COOLING SYSTEM ON AND OFF
You can disable the cooling system in your refrigerator
by pressing the On/Off button located on the left side of
the temperature control panel. To ensure that you do not
accidentally turn off the cooling system, the button does
not work unless you press
and hold it for three seconds.
Once you disable the cooling system, all refrigeration to
the freezer and fresh food compartments stops. To turn
the cooling system back on, you must again press
and
hold the On/Off button for three more seconds.
SYSTEM MONITORING ALARMS
(Select Models)
The electronic control system continuously monitors
your refrigerator/freezer for temperature consistency,
doors left ajar, and power failures. Variances from
normal operating conditions are communicated by
audible tones and a set of four status indicator lights.
USING THE ALARM RESET BUTTON
You can disable or activate the alarm system by
pressing and holding the Reset button for three
seconds. Use it, for example, to turn off audible tones
and/or flashing indicator lights.
Once you disable the alarm system, you must again
press and hold the Alarm Reset button for three more
seconds to reset (activate) the alarm system.
Cooling System On/Off Button
The On indicator light remains off while the freezer and
refrigerator compartments cool toward the current cooling
settings. When temperature settings are reached, the On
light displays green to indicate an active alarm system.
RESPONDING TO ALARMS (Audible Tones &
Indicator Lights)
Your refrigerator’s control system can convey the following
information through audible tones and the alarm indicator
lights.
IMPORTANT: Pressing the On/Off button on the control
panel disables your refrigerator’s cooling system but does
not disconnect power to lights and other electrical
components. To turn off power to your refrigerator you
must unplug the power cord from the wall outlet.
NOTE:
Each time you make settings on the control panel,
a single audible tone acknowledges your input.
The alarm system does not
automatically reset if you disconnect and reconnect
your refrigerator’s power cord. It can only be
reactivated by pressing the Alarm Reset button.
Alarm Light Tone
Condition
How To Respond
On
(light is
off)
Alarm system is
not active while
freezer and
refrigerator
compartments
are cooling
toward the
current
temperature
settings.
If freezer and refrigerator
compartments do not match
your temperature settings in
three hours, expect the
control system to signal other
conditions. If cooling does
not stabilize toward your
current settings call for
assistance, using the phone
number on the back page of
this Use & Care Guide .
Steady
Green
Alarm system is
active.
No response required.
Door
Ajar
Flashing
Green
9
Freezer or
refrigerator
door has been
open for over
five minutes.
Close door to disable and reset
alarm.
High
Temp
Flashing
Amber
9
Freezer or
refrigerator
compartment
has been too
warm (7.2
° C
or higher) for
over an hour.
Press Alarm Reset button to
turn off alarm. If
temperatures do not
improve, call for assistance,
using the phone number on
the back page of this Use &
Care Guide .
Power
Failure
Flashing
Amber
A power outage
was detected.
Press Alarm Reset button to
turn off alarm and press
again to reset. Check if the
power failure lasted long
enough to affect stored food
temperatures.
Alarm Reset Button
Indicator Lights
Help YG remain FREE
Advertise with YG