Bookmark and Share
Whirlpool Installation Instructions - W10177448-008

Whirlpool Installation Instructions - W10177448-008

From YouserGuide

Jump to: navigation, search
You can edit and write guides yourself, or if you prefer, just send your input to guides@youserguide.com

untitled (Product)
Pg. 1-2-3-4-5-6-7- 8 -9-10-11-20-28

Products referring to this guide:-Whirlpool IHI8304VS0-Ikea IHI8304VS0

Enter your
Part number


background image
8
Make Electrical Connection
1. Disconnect power.
2. Remove terminal box cover.
3. Remove the knockout.
4. Install a UL listed or CSA approved strain relief.
5. Run 3 wires, black, white and green (14 AWG), in ½" conduit
from service panel to terminal box. Use caulking to seal
opening.
6. Use UL listed wire connectors and connect black wires (F)
together.
7. Use UL listed wire connectors and connect white wires (E)
together.
8. Use UL listed wire connectors and connect green (or bare)
wire with yellow-green wire (D).
9. Tighten strain relief screws.
10. Replace terminal box cover.
11. Check all light bulbs to make sure they are secure in their
sockets.
12. Reconnect power.
Install Vented Range Hood
1. Insert 4 screws on the bottom of the chimney structure (in
corresponding position to the keyhole slots on the hood
canopy).
2. Lift hood canopy so that the large end of the keyhole slots are
over the 4 screws on the bottom of the chimney structure.
3. Push the hood canopy so that the 4 screws are in the narrow
end of the keyhole slots. Securely tighten the screws.
4. Install the remaining 4 screws and securely tighten.
A.Knockout
B.Terminal box cover
A.Home power supply cable
B.Terminal box cover
C.UL listed or CSA approved strain relief
D.Green (or bare) wire connected to yellow-green wire
E.White wires
F.Black wires
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
A
B
A
B
C
D
E
F
A.Four screws
Front
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal box.
Failure to do so can result in death or electrical shock.
A
Help YG remain FREE
Advertise with YG